SyncMaster 2693HM/2493HMLCD MonitorUser Manualimagine the possibilities
Sold separately Stereo Cable USB Cable Others Cleaning Cloth NoteThis is only provided for highly polished black products as a product feature.
Front NoteTouch them lightly with your fingers to use them.MENU button [MENU/ ]Opens the on-screen menu and exits from the menu. Also use to exit the
NoteIf you select the digital mode, you must connect your monitor to the graphic card'sDVI port using the DVI cable.>> Click here to see a
POWER S/WSwitch the monitor on and off.POWER INConnect the power cord for your monitor to thePOWER IN port on the back of the monitor.HDMI IN / DVI IN
NoteTo use DOWN (Downstream Port), you haveto connect the UP (Upstream Cable ) to thePC.Make sure to use the USB cable supplied with thismonitor
ConnectionsConnecting CablesConnect the power cord for your monitor to the POWER IN port on the back ofthe monitor.Plug the power cord for the monitor
Connecting Using a HDMI Cable1. Input devices such as digital DVD are connected to the HDMI IN terminal of the monitor usingthe HDMI cable. When all t
The USB port of the monitor supports High-Speed Certified USB 2.0.High speed Full speed Low speedData Rate 480 Mbps 12 Mbps 1.5 MbpsPower Consumptio
NoteWhen connecting a device to the DOWN port of the monitor, connect the device using acable appropriate to the device.(For the purchase of the ca
Tilt angleUsing ( ), You can adjust the tilt angle within a range of 5° forward to 25° backward for the mostcomfortable viewing angle.Sliding stand /
Safety InstructionsNotational NotePlease read the following safety instructions as they are designed to prevent damage to property andharm to the user
Monitor Mounting interface pad (Sold separately)1. Turn off your monitor and unplug its power cord.2. Lay the LCD monitor face-down on a flat surface
Using the SoftwareMonitor Driver NoteWhen prompted by the operating system for the monitor driver, insert the CD-ROMincluded with this monitor. Driver
NoteThis monitor driver is under certifying MS logo, and this installation doesn't damage your system.The certified driver will be posted on Sam
NoteThis monitor driver is under certifying MS logo, and this installation doesn't damage your system.The certified driver will be posted on Sam
9. Select the model that matches your monitor from the list of monitor models on the screen, andclick "Next". 10. Click "Close" →
1. Insert CD into the CD-ROM drive.2. Click "Start" → "Control Panel" then click the "Appearance and Themes" icon.3. Cli
7. Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in the modellist and click the "Next" button.
10. Monitor driver installation is completed.Microsoft® Windows® 2000 Operating SystemWhen you can see "Digital Signature Not Found" on you
4. Select the "Monitor" tab.5. Click the "Change" button in the "Monitor Type" area.6. Choose "Specify the location
Natural ColorNatural Color Software ProgramOne of the recent problems in using a computer is that the color of the images printed out by a printeror o
Do not excessively bend the plug and wire nor place heavy objectsupon them, which could cause damage.• This may cause electric shock or fire. Do not
NoteIf the popup window to install the software for the main screen is not displayed, proceed with theinstallation using the MagicTune executable fil
1. The "Display Driver" should be properly loaded for the MagicRotation to work properly.The installed "Display Driver" should be
UninstallThe AutoRotation program can be removed only by using the "Add or Remove Programs" option ofthe Windows® Control Panel.Perform the
Adjusting the MonitorDirect Functions [2693HM]AUTOWhen the 'AUTO' button is pressed, the auto adjustment screen appears as shown in the anim
When pressing the MENU button after locking the OSDThis is the function that locks the OSD in order to keep the current states of settings or prevent
NoteThough the OSD adjustment lock function is activated, you can still adjust the brightness and contrast,and adjust Customized Key ( ) using the Di
VolumeWhen OSD is not on the screen, push the button to adjust volume.SOURCESelects the video signal while the OSD is off.OSD Function [2693HM] Pictur
ColorLive Color Color Tone Color Con-trolColor Effect Gamma ImageCoarse Fine Sharpness H-Position V-Position OSDLanguage H-Position V-Position Trans
You can use the on-screen menus to change the contrast according to personal preference.MENU → → , → → , → MENUMagicBrightPush the butto
• CustomAlthough the values are carefully chosen by our engineers, the pre-configured values may not becomfortable to your eyes depending on your tast
Do not place the product on the floor.• Take care, as someone, specifically children may trip over it. TO PREVENT THE SPREAD OF FIRE, KEEP CA
Live Color function provides optimized color for personal favor to view effectively with WCG-CCFLwhich was applied to Samsung Electronics for the firs
Color ControlAdjusts individual Red, Green, Blue color balance.MENU → , → → , → → , → → , → MENUColor EffectYou can change the o
• Grayscale - The default colors of black and white are displayed.• Green - This applies the green color effect to a black and white screen.• Aqua - T
ImageCoarseRemoves noise such as vertical stripes.Coarse adjustment may move the screen image area. You may relocate it to the center usi
FineRemoves noise such as horizontal stripes.If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed).(Avai
MENU → , → → , → → , → MENUH-PositionChanges the horizontal position of the monitor's entire display.(Available in Analog mode on
(Available in Analog mode only)MENU → , → → , → → , → MENU OSDLanguageYou can choose one of nine languages. NoteThe language chosen af
H-PositionYou can change the horizontal position where the OSD menu appears on your monitor.MENU → , → → , → → , → MENUV-PositionYou c
TransparencyChange the transparency of the background of the OSD.• Off • OnMENU → , → → , → → , → MENUDisplay TimeThe menu will be aut
• 5 sec • 10 sec • 20 sec • 200 secMENU → , → → , → → , → MENU SetupResetReverts the product settings to factory defaults.• No • YesME
Do not spray water or detergent directly onto the monitor.• This may cause damage, electric shock or fire. Use the recommended detergent with a smoot
Customized KeyYou can specify a function which will be activated when the Customized Key ( )is pressed.MENU → , → → , → → , →MENUOff Ti
Auto SourceSelect Auto Source for the monitor to automatically select the signal source.• Auto • ManualMENU → , → → → , → MENUImage SizeYo
• Normal - The screen is displayed in accordance with the screen aspect ratio of the input signals.• Wide - A full screen is displayed regardless of t
HDMI Black LevelWhen a DVD or set-top box is connected to your TV via HDMI, it may cause a degradation in thescreen quality, such as an increase in th
MENU → , →MENUDirect Functions [2493HM]AUTOWhen the 'AUTO' button is pressed, the auto adjustment screen appears as shown in the animate
When pressing the MENU button after locking the OSDThis is the function that locks the OSD in order to keep the current states of settings or prevent
NoteThough the OSD adjustment lock function is activated, you can still adjust the brightness and contrast,and adjust Customized Key ( ) using the Di
VolumeWhen OSD is not on the screen, push the button to adjust volume.SOURCESelects the video signal while the OSD is off.OSD Function [2493HM] Pictur
ColorMagicColor Color Tone Color Con-trolColor Effect Gamma ImageCoarse Fine Sharpness H-Position V-Position OSDLanguage H-Position V-Position Trans
You can use the on-screen menus to change the contrast according to personal preference.MENU → → , → → , → MENUMagicBrightPush the butto
Do not try to move the monitor by pulling only the wire or the signalcable.• This may cause a breakdown, electric shock or fire due to damage tothe c
• CustomAlthough the values are carefully chosen by our engineers, the pre-configured values may not becomfortable to your eyes depending on your tast
MagicColor is a new technology that Samsung has exclusively developed to improve digital imageand to display natural color more clearly without distur
Color ControlAdjusts individual Red, Green, Blue color balance.MENU → , → → , → → , → → , → MENUColor EffectYou can change the o
• Grayscale - The default colors of black and white are displayed.• Green - This applies the green color effect to a black and white screen.• Aqua - T
ImageCoarseRemoves noise such as vertical stripes.Coarse adjustment may move the screen image area. You may relocate it to the center usi
Removes noise such as horizontal stripes.If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed).(Availabl
Changes the horizontal position of the monitor's entire display.(Available in Analog mode only)MENU → , → → , → → , → MENUV-Posit
OSDLanguageYou can choose one of nine languages. NoteThe language chosen affects only the language of the OSD. It has no effect on any software runni
H-PositionYou can change the horizontal position where the OSD menu appears on your monitor.MENU → , → → , → → , → MENUV-PositionYou c
TransparencyChange the transparency of the background of the OSD.• Off • OnMENU → , → → , → → , → MENUDisplay TimeThe menu will be aut
Viewing the monitor continuously at a too close angle may result indamage to your eyesight. To ease eye strain, take at least a five-minute break aft
• 5 sec • 10 sec • 20 sec • 200 secMENU → , → → , → → , → MENU SetupResetReverts the product settings to factory defaults.• No • YesME
Customized KeyYou can specify a function which will be activated when the Customized Key ( )is pressed.MENU → , → → , → → , →MENUOff Tim
Auto SourceSelect Auto Source for the monitor to automatically select the signal source.• Auto • ManualMENU → , → → → , → MENUImage SizeYo
• Wide - A full screen is displayed regardless of the screen aspect ratio of the input signals. NoteThis does not operate when the resolution of your
HDMI Black LevelWhen a DVD or set-top box is connected to your TV via HDMI, it may cause a degradation in thescreen quality, such as an increase in th
MENU → , →MENUAdjusting the Monitor74
TroubleshootingSelf-Test Feature Check NoteYour monitor provides a self test feature that allows you to check whether your monitor is functioningprope
noisy, and video mode not supported, etc. In this case, first check the source of the problem, and thencontact the Service Center or your dealer.Judgi
A: If the display exceeds SXGA or 75 Hz, a "Not Optimum Mode", "Recommended Mode 1920x 1200 60 Hz" message is displayed. If the di
Q: The screen can be unbalanced due to the cycle of the video card signals. Readjust Position byreferring to the OSD.The screen is out of focus or OSD
• Adjust the monitor angle so that there is no reflectedlight on the screen. Try to maintain your arms perpen-dicular to your armpits.• Keep
If the volume is still too low after turning the control to its maximum, check the volume controlon the computer sound card or software program.Check
Q & AQ: How can I change the frequency?A: The frequency can be changed by reconfiguring the video card.A: Note that video card support can vary, d
SpecificationsGeneralGeneralModel Name SyncMaster 2693HMLCD PanelSize 25.5 " diagonal (64 cm)Display area 550.08 mm (H) x 343.8 mm (V)Pixel Pitch
Environmental considerationsOperating Temperature : 50°F ~ 104°F (10°C ~ 40°C)Humidity : 10 % ~ 80 %, non-condensingStorage Temperature : -4°F ~ 113°F
Preset Timing ModesIf the signal transferred from the computer is the same as the following Preset Timing Modes, thescreen will be adjusted automatica
LCD PanelPixel Pitch 0.270 mm (H) x 0.270 mm (W)SynchronizationHorizontal 30 ~ 81 kHzVertical 56 ~ 75 HzDisplay Color16.7 MResolutionOptimum resolutio
Plug and Play CapabilityThis monitor can be installed on any Plug & Play compatible system. The interaction of themonitor and the computer systems
Display Mode HorizontalFrequency(kHz)Vertical Fre-quency (Hz)Pixel Clock(MHz)Sync Polarity(H/V)IBM, 640 x 350 31.469 70.086 25.175 +/-IBM, 640 x 480 3
InformationFor Better Display Adjust the computer resolution and screen injection rate (refresh rate) on the computeras described below to enjoy the b
when switching to a new video image. All display products, including LCD, are subject toimage retention. This is not a product defect.Please follow th
IntroductionPackage Contents NotePlease make sure the following items are included with your monitor.If any items are missing, contact your dealer.Con
Ex)• Every 30 minutes, change the characters with movement.Ex) The best way to protect your monitor from Image retention is to set your PC or Systemto
Our LCD Monitor satisfies ISO13406-2 Pixel fault Class IIInformation90
AppendixContact SAMSUNG WORLDWIDE NoteIf you have any questions or comments relating to Samsung products, please contact the SAMSUNGcustomer care cent
EuropeITALIA 800-SAMSUNG(726-7864) http://www.samsung.com/itLUXEMBURG 0035 (0)2 261 03 710 http://www.samsung.com/beNETHERLANDS 0900 SAMSUNG(726-7864
Middle East & AfricaSOUTH AFRICA 0860-SAMSUNG(726-7864) http://www.samsung.com/zaTURKEY 444 77 11 http://www.samsung.com.trU.A.E 800-SAMSUNG(726-7
Correct DisposalCorrect Disposal of This Product (Waste Electrical & Electronic Equipment) -Europe only(Applicable in the European Un
Kommentare zu diesen Handbüchern