Samsung BD-H6500 Bedienungsanleitung PDF herunterladen (Seite 21)

21 English

04 Settings

Ğ

Wired - Manual

If you have a static IP address or the Automatic

procedure does not work, you'll need to set

the Network Settings values manually.

Follow Steps 1 and 2 in Wired - Automatic,

and then follow these steps:

1. Select Network Status. The product

searches for a network, and then displays

the connection failed message.

2. On the bottom of the screen, select IP

Settings, and then press the

v

button.

The IP Settings screen appears.

3. Select the IP Setting field, and then press

the

v

button.

4. Select Enter manually in the IP Setting

field, and then press the

v

button.

5. Select a value to enter (IP Address, for

example), and then press the

v

button.

Use the number keypad on your remote

control to enter the numbers for the value.

You can also enter numbers using the

▲▼ buttons. Use the ◀▶ buttons on the

remote control to move from entry field

to entry field within a value. When done

with one value, press the

v

button.

6. Press the ▲ or ▼ button to move to

another value, and then enter the

numbers for that value following the

instructions in Step 5.

7. Repeat Steps 5 and 6 until you have filled

in all values.

|

NOTE

|

\

You can get the Network values from your Internet

provider.

8. When finished entering all the values,

select OK, and then press the

v

button. The product verifies the network

connection and then connects to the

network.

Wireless Network

You can set up a wireless network connection

in four ways:

-

Wireless Automatic

-

Wireless Manual

-

WPS(PBC)

-

WPS(PIN)

When you configure the wireless network

connection, any wireless network devices

currently connected through the product

or, if applicable, the product's current wired

connection, will be disconnected.

Ğ

Wireless - Automatic

1. In the Home screen, select Settings, and

then press the

v

button.

2. Select Network, and then press the

v

button.

3. Select Network Settings, and then press

the

v

button.

4. Select Wireless in the Network Settings

screen, and then press the

v

button. The

product searches for and then displays a

list of the available networks.

Network Settings

Select your network type.

Wireless network

iptime23

iptime

solugen_edu#2

Network type Wireless

Refresh WPS(PBC)

You can connect your Blu-

ray player to the internet.

Please select which wireless

network to use.

5. Select the desired network, and then press

the

v

button.

6. On the Security screen, enter your

network's Security Code or Pass Phrase.

Enter numbers directly using the number

buttons on your remote control. Enter

letters by selecting a letter with an arrow

button, and then pressing

v

button.

[BD-H6500-XU]AK68-02465G-02ENG-.indd 21 2014-05-27 오후 1:39:01

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 63 64

Kommentare zu diesen Handbüchern

Keine Kommentare