Samsung BD-J7500 Bedienungsanleitung PDF herunterladen (Seite 23)

23 English

04 Settings

Ğ

Wired - Manual

If you have a static IP address or the Automatic

procedure does not work, you'll need to set the

Network Settings values manually.

Follow Steps 1 and 2 in Wired - Automatic, and

then follow these steps:

1. Select Network Status. The product

searches for a network, and then displays the

connection failed message.

2. On the bottom of the screen, select IP

Settings, and then press the

v

button.

The IP Settings screen appears.

3. Select the IP Settings field, and then press

the

v

button.

4. Select Enter manually in the IP Settings

field, and then press the

v

button.

5. Select a parameter to enter (IP Address, for

example), and then press the

v

button.

Use the number keypad on your remote

control to enter the numbers for the

parameter. You can also enter numbers using

the ▲▼ buttons. Use the ◄► buttons on

the remote control to move from entry field

to entry field within a parameter. When done

with one parameter, press the

v

button.

6. Press the ▲ or ▼ button to move to another

parameter, and then enter the numbers for

that parameter following the instructions in

Step 5.

7. Repeat Steps 5 and 6 until you have filled in

all parameters.

| NOTE |

\

You can get the Network parameters from your Internet

provider.

8. When finished entering all the parameters,

select OK, and then press the

v

button.

The product verifies the network connection

and then connects to the network.

Wireless Network

You can set up a wireless network connection in

four ways:

- Wireless Automatic

- Wireless Manual

- WPS(PBC)

- WPS PIN

When you configure the wireless network

connection, any wireless network devices currently

connected through the product or, if applicable,

the product's current wired connection, will be

disconnected.

Ğ

Wireless - Automatic

1. In the Home screen, select Settings, and

then press the

v

button.

2. Select Network, and then press the

v

button.

3. Select Network Settings, and then press the

v

button.

4. Select Wireless in the Network Settings

screen, and then press the

v

button. The

product searches for and then displays a list

of the available networks.

Network Settings

Select your network type.

Wireless network

iptime23

iptime

solugen_edu#2

Network type Wireless

Refresh WPS(PBC)

You can connect your Blu-

ray player to the internet.

Please select which wireless

network to use.

5. Select the desired network, and then press

the

v

button.

6. On the Security screen, enter your network's

Security Code or Pass Phrase.

Enter numbers directly using the number

buttons on your remote control. Enter letters

by selecting a letter with an arrow button, and

then pressing

v

button.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 63 64

Kommentare zu diesen Handbüchern

Keine Kommentare