Samsung CHT-250 Bedienungsanleitung PDF herunterladen (Seite 26)

Setting Up the Display Options

1 With the unit in Stop mode, press the MENU button.

2 Select DVD using

❷

buttons, then OK or

❿

button.

3 Select Display Setup using

❷

buttons, then press the OK

❿

button.

4 Use the

❷

buttons to select the desired item. Then press the

OK or

❿

button.

◆ TV Aspect

Depending on the type of television you have, you may want

to adjust the screen setting (aspect ratio).

1. 4:3 Letter Box :

Select when you want to see the total 16:9 ratio screen DVD

supplies, even though you have a TV with a 4:3 ratio screen.

Black bars will appear at the top and bottom of the screen.

2. 4:3 Pan Scan :

Select this for conventional size TVs when you want to see

the central portion of the 16:9 screen. (Extreme left and right

side of movie picture will be cut off.)

3. 16:9 Wide :

You can view the full 16:9 picture on your widescreen TV.

◆ Black Level

Adjusts the brightness of the screen.(On/Off)

◆ NTSC Disc Output

“NTSC” if the screen only has one NTSC-video entrance.

If this is not the case, you can choose to leave “ PAL 60Hz”

as is.

◆ DVD Output

Component : Sends COMPONENT signal (Y, Pb, Pr) to

the component video out JACK.

S-Video : Sends S-VIDEO signal to the S-VIDEO OUT JACK.

Video : - Sends COMPOSITE VIDEO signal to Line out JACK.

- Sends COMPONENT INTERLACE signal from

COMPONENT JACK.

DVD

NTSC Disc Output

DVD Out

TV Aspect

Black Level

Display Setup

: 4:3 L-Box

: PAL 60Hz

: Component

Setup

Display Setup

Setup :

S-Video Connections (for DVD)

DVD

The S-Video is only for the DVD player. The tuner and VCR will

still be viewed through the RF or line inputs.

You must follow the “DVD Out” instructions above to activate

your alternative (S-Video) video selection. If your television is

equipped with S-Video input, you can enjoy superior video

quality when watching DVDs with your DVD-VCR.

1 Connect S-Video Out to TV

Connect an S-Video cable from the S-Video Out on the back

panel of the DVD-VCR to the S-Video Input on your television.

SPEAKERS

FRONT R FRONT L WOOFER

SURROUND R SURROUND L CENTER

DVD Only

COMPONENT VIDEO OUT

S-VIDEO OUT

To S-Video Input on Your TV

Component Connections (for DVD)

DVD

Component video output is available only for DVD playback. RF

and Line input are available for Tuner and VCR playback.

If your TV set supports Progressive Scan, it can transmit Pr, Pb, and

Y signals separately, so you can enjoy sharp and clear picture.

☛

What is Progressive Scan?

It is a set of jacks that can provide sharp and clear picture

quality by using twice the number of fields of lines than

component output.

1 Connect the component output of the DVD player to your TV set.

Use the component cable to connect the component output on the

back panel of the DVD-VCR to the component input of your TV.

◆ If you mix up the connections when connecting the component cable,

the picture will appear reddish or bluish.

2 Set your TV to COMPONENT.

Select component input as your TV's AV input. At this point, even

if the picture appears reddish, it is normal.

3 Press the P.SCAN button on the front panel.

If the P.SCAN button on the front panel of the DVD-VCR is

pressed, a green LED will light up and the following message will

be displayed:

To activate Progressive Scan, press OK.

The following message will be displayed and then the picture will

be played in Progressive Scan mode.

4 To deactivate Progressive Scan, press the P.SCAN button again.

If the P.SCAN button on the front panel of the DVD-VCR is

pressed again, a green LED will light up and Progressive Scan

mode will be canceled. Select another mode as your TV's AV input

to view another output of the DVD-VCR.

➢

This is available only for a TV set that supports Progressive Scan.

•

While Progressive Scan is active, video, S-video are not

available.

•

To activate Progressive Scan, the DVD-VCR must be in Stop

mode.

➢

You can listen to audio sound through Line OUT audio output or

5.1CH speakers while watching Component or S-Video output.

SPEAKERS

FRONT R FRONT L WOOFER

SURROUND R SURROUND L CENTER

DVD Only

COMPONENT VIDEO OUT

S-VIDEO OUT

To Component

Input on Your TV

Press "OK" to confirm

Prorgessive scan mode.

Otherwise press "RETURN".

Please set your TV to component

input. If your TV doesn't have

Progressive scan mode, there will

be no signal on the screen.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 37 38

Kommentare zu diesen Handbüchern

Keine Kommentare

Samsung CHT-250 Bedienungsanleitung Seite 26

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für DVD Spieler Samsung CHT-250