Samsung NP-X60 Bedienungsanleitung PDF herunterladen (Seite 145)

7-21

Chapter 7. Recovering the Computer

A6 Check the network key settings (encryption key).

When automatic code conversion (a passphrase function) has been selected and

data communication is not functioning even with a normal wireless connection, it

is recommended entering the network key (encryption key) manually.

A7 Check the AP settings as follows. (The following is recommended for a standard

environment and thus may differ according to the specific wireless network

environment.)

󳀏 When several APs are present simultaneously, check the channel setting for

each AP. When different APs are using nearby channels, interference may

occur between electronic waves. Set the APs’ channels further apart from

each other. (Ex: Ch1, Ch5, Ch9, Ch13)

󳀏 When an AP’s SSID (Service Set ID) option is set to “Hide”, you cannot search

for that AP on the computer. We recommend canceling the “Hide” option for

an AP. The SSID is a name for distinguishing one wireless LAN from another

wireless LAN.

󳀏 It is recommended using Long Preamble. Preamble is a signal for data

transmission synchronization. Short Preamble may be supported by some

types of APs but may cause compatibility problems.

󳀏 It is recommended using a static IP.

󳀏 Since static channel selection is more reliable than auto channel selection, it is

recommended setting a static channel.

Q5 In the Windows XP ‘Available wireless networks’ window, the

Wireless Network Connection is displayed as ‘Not Available’.

A1 Check if the wireless LAN is turned on.

A2 Check if there is additional program for a wireless LAN connection installed.

Windows XP supports wireless LAN connections through the Wireless Zero

Configuration (WZC) service. Therefore, an additional program for wireless LAN

connection is not required, unless the network requires a specific program.

However, installation of some wireless LAN related programs may sometimes

disable the [View Available Wireless Networks] window supported by WZC

service. Exit the wireless LAN related program then check whether the window is

enabled.

A3 Initialize the device driver.

Click Start > Control Panel > Performance and Maintenance >

System > Hardware tab > Device Manager > Network adapters,

and select the wireless LAN adapter. Right-click the network adaptor and select

'Disable' from the popup menu. Then right-click over the network adaptor and

select 'Enable' after a short wait to check that the device is operating properly.

x60-hk_ch7 2006.1.9 10:52 AM 페이지21 1000 Dolev-2540-Color-S T

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 163 164

Keine Kommentare

Samsung NP-X60 Bedienungsanleitung Seite 145