Samsung DCS 400si Betriebsanweisung PDF herunterladen (Seite 20)

HOLIDAY

This program provides the ability to set as many as 20 different holidays. Each

holiday will override the System Operating Mode for that particular date with a

programmed ring plan.

PROGRAM KEYS

UP & DOWN - Used to scroll through options.

KEYPAD - Used to enter selections.

SOFT KEYS - Move cursor left and right.

HOLD - Used to clear an entry.

ACTION DISPLAY

1. Press TRSF and then dial 512 RING PLAN

Display shows FOLLOW1

2. Press the right soft key to move the RING PLAN

cursor to bottom half of display FOLLOW1

3. Enter the desired ring plan (e.g., 0-6) RING PLAN

Display will return to STEP 1 FOLLOW4

4. Press UP or DOWN to change display ASSIGN HOLIDAY

to holiday assignment 01:

5. Press the right soft key to move the ASSIGN HOLIDAY

cursor to bottom half of display 01:

6. Enter a desired holiday date ASSIGN HOLIDAY

(e.g., 1225) 01:

7. Press TRSF to store and exit ASSIGN HOLIDAY

programming OR press SPK to store 01:1225

and advance to the next program

CUSTOMER SET RELOCATION

This program is used to swap information associated with two stations. All as-

signments such as trunk ring, station group, station COS, station speed dial

etc. will follow this program. 12 button keysets and 24 button keysets can be

exchanged. Basic 7 button keysets can be exchanged with Basic 7 button key

sets. Single line stations numbers can be exchanged. If incompatible set types

are selected the DCS system will provide an ERROR: NO MATCH message. 12

button and 24 button key assignments should be taken in consideration when

relocating these type of sets. The table below shows which phones can be

switched with each other.

NOTE: In order to use this program it must first be activated by a technician.

Please see your installing company to have this done if you wish to use this

program.

CUSTOMER SET RELOCATION ALLOW TABLE

PROGRAM KEYS

UP & DOWN - Used to scroll through options.

KEYPAD - Used to enter selections.

SOFT KEYS - Move cursor left and right.

SPK - Used to store data and advance to next program.

HOLD - Used to clear previous entry.

ANS/RLS - Used to select ALL.

L/SNTB721CSB21DCL42CSB42DCLMOAMB46

L/SSEYONONONONONONON

NTB7ONSEYONONONONONON

21CSBONONSEYSEYSEYSEYONON

21DCLONONSEYSEYSEYSEYONON

42CSBONONSEYSEYSEYSEYONON

42DCLONONSEYSEYSEYSEYONON

MOAONONONONONONSEYON

MB46ONONONONONONONSEY

1 2 ... 15 16 17 18 19 20 21 22

Kommentare zu diesen Handbüchern

Keine Kommentare

Samsung DCS 400si Betriebsanweisung Seite 20

Kommentare zu diesen Handbüchern