Samsung DSR 9500A Technical Information PDF herunterladen (Seite 30)

DSR 9500A FTA, CI, EM VIA, VIA CI

GB-16

DIGITAL SATELLITE RECEIVER

DSR 9500A FTA, CI, EM VIA, VIA CI

GB-17

● Select from Menu Mode:

"User" mode : Enables control of basic positioner function

recommended for beginners. General user uses “User” mode.

"Installer" mode : Complete control of the positioner’s full functions

recommended for installers and professional users.

1.2.1 User Mode

● Select Driving Mode:

You have an option to choose the positioner’s

movement type: Continuous, Step or Time.

● Position the antenna with north, south, east

and west and use the / , / key to drive

motor. key drives to west, key drives to east,

key drives to north and key drives to south.

● If you finished driving of motor, select “Store

current Position.” and press key, to reset

new driving motor.

NNoottee

: The level indicated in the “Signal Status” is only for reference.

The signal quality may be adequate even though the level indicated is

not maximum.

● Go to Stored Position.

When the stored position is reached then screen displays "Stop",

you can now continue with the further operations.

● Select the Calculate Sat Positions to recalculate the satellite position and key.

1.1 LNB Setting

You can select the satellite and LNB setting conditions

to execute channel search and you can alter the settings

for 22kHz tone. The parameters set in this menu are

needed for programming the channels for the "Auto

scanning" and "Manual scanning".

The necessary information can be found at your antenna

and LNB brochures, or you can ask your dealer.

● Select LNB power supply "On".

● Select the desired satellite name.

● Select the LNB type (frequency).

● Select the DiSEqC Mode

(Off, DiSEqC A, DiSEqC B, DiSEqC C, DiSEqC D, Tone Burst A, Tone Burst B)

If you are using a Positioner, select this option. (“Yes” or “No”)

22KHz: In case you are using a dual LNB or two antennas connected to a 22KHz

tone switch box, with the 22 KHz tone switch ("On", "Off" or "Auto") you

can switch between both LNB or antennas.

1.2 Positioner Setting

If you have a DiSEqC 1.2 motorized system, then you can

take advantage of the DiSEqC 1.2 functions available.

● Select Satellite.

● Select any transponder from above satellites and

check out the Frequency, Symbol Rate, FEC and Polarity.

In case problems arise, ask your dealer.

OPERATING THE RECEIVER OPERATING THE RECEIVER

DSR 9500A_GB 12/8/03 1:04 PM Page 16

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36 37 38

Kommentare zu diesen Handbüchern

Keine Kommentare

Samsung DSR 9500A Technical Information Seite 30

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Empfänger Samsung DSR 9500A