Samsung NC190 Bedienungsanleitung PDF herunterladen (Seite 41)

Installing the Software 4-1

administrator to correct it.

• <Gateway>

The <Gateway> field is the device’s gateway IP address. If DHCP is disabled, this field is required. If DHCP is enabled,

this field is not editable.

• <Primary DNS Server>

The <Primary DNS Server > field is the device’s primary DNS IP address. This field is optional. If DHCP is enabled, this

field is not editable.

• <Secondary DNS Server>

The <Secondary DNS Server> field is the device’s secondary DNS IP address. This field is optional. If DHCP is enabled,

this field is not editable.

• <Domain Name>

The <Domain Name> is the domain name used, e.g. ‘domain.local’. This field is optional. This field specifies the domain

that the Host or Portal is on.

•<FQDN>

The <FQDN> is the Fully Qualified Domain Name for the Host or Portal. The default is pcoip-host-MAC or pcoip-portal-

MAC where MAC is the Host or Portal’s MAC address. If used, the Domain Name will be appended, e.g. pcoip-host-

MAC.domain.local.

To use the FQDN feature, a properly configured DNS server with DHCP option 81 must be available.

• <Ethernet Mode>

The <Ethernet Mode> field configures the Ethernet mode of the Portal. The options are:

•<Auto>

• <10 Mbps Full-Duplex>

• <100 Mbps Full-Duplex>

Administrators should always set the <Ethernet Mode> to <Auto> and only use <10 Mbps Full-Duplex> or <100

Mbps Full-Duplex> when the other network equipment, e.g. switch, is also configured to operate at <10 Mbps Full-

Duplex> or <100 Mbps Full-Duplex>.

<Label> Tab

The <Label> tab allows an administrator to add custom information for the Host or Portal.

The Portal Label parameters can also be configured using the Webpage Administration Interface.

<Label> Configuration

• <PCoIP Device Name>

Figure 2-5:

Downloaded from ManualMonitor.com Manuals

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 70 71

Keine Kommentare

Samsung NC190 Bedienungsanleitung Seite 41