Samsung C61RCDST Bedienungsanleitung PDF herunterladen (Seite 8)

< IN ~ >

L: Brown

N: Blue

PE: Green

230 V ~

Installing the Hob (Continued)

Connecting to the mains power supply

Before connecting, check that the nominal voltage of the appliance, that is, the voltage stated

on the rating plate, corresponds to the available supply voltage. The rating plate is located on

the lower casing of the hob.

Shut off power to circuit before connecting wires to circuit.

The heating element voltage is AC230 V~. The appliance also works perfectly on older

networks with AC220 V~.

The hob is to be connected to the mains using a device that allows the appliance to be

disconnected from the mains at all poles with a contact opening width of at least 3 mm, eg.

automatic line protecting cut - out, earth leakage trips or fuse.

A type H05SS - F (180°C) cable or one of a higher grade must be used as the mains

connecting cable.

Rated current of appliance (A) Nominal cross-sectional area (mm²)

1N~ > 25 and ≤ 32 > 4 and < 6

2N~ > 10 and ≤ 16 > 1.5 and < 2.5

The connection must be carried out as shown in the diagram. The connecting links should be

ﬁtted according to the appropriate connection diagram.

The earth lead is connected to terminal. The earth lead must be longer than leads carrying

electric current.

The cable connections must be made in accordance with regulations and the terminal screws

tightened securely.

The connecting cable is to be secured with the mains cable cleat and the covering closed by

pressing ﬁrmly (locking into place). Before switching on for the ﬁrst time, any protective foil or

stickers must be removed from the ceramic glass surface.

Once the hob is connected to the mains supply, check that all cooking zones are

ready for use by brieﬂy switching each on in turn at the maximum setting.

When the hob is powered on for the ﬁrst time, all displays light and the child safety

lock is activated.

Warning:

Pay attention (conformity) to phase and neutral allocation of house

connection and appliance (connection schemes); otherwise, components can be

damaged.

Warranty does not cover damage resulting from improper installation.

C61RCDST_XET-00081A_EN.indd 6 2006-12-26 ¿ÀÀü 8:30:45

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Keine Kommentare

Samsung C61RCDST Bedienungsanleitung Seite 8