Samsung 820DXN-2 Bedienungsanleitung PDF herunterladen (Seite 27)

Connecting to a Camcorder

1. Locate the AV output jacks on the camcorder. They are usually found on the side or back

of the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on

the camcorder and the AV/COMPONENT AUDIO IN [R-AUDIO-L] on the LCD Display .

2. Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV

IN [VIDEO] on the LCD Display .

3. Select AV for the Camcorder connection using the Source button on the front of the LCD

Display or on the remote control.

4. Then, start the Camcorder with a tape inserted.

Note

The audio-video cables shown here are usually included with a Camcorder. (If not, check

your local electronics store.) If your camcorder is stereo, you need to connect a set of two

cables.

Connecting the BNC to BNC cable

1. Connect the BNC/COMPONENT IN [R/Y, G/P

, B/P

] ports on the monitor to the BNC

port on the external device using the BNC to BNC cable.

Connections

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 123 124

Keine Kommentare

Samsung 820DXN-2 Bedienungsanleitung Seite 27