Samsung NX58J7750SG Gebrauchs- und Pflegehandbuch PDF herunterladen (Seite 68)

68 English

Maintenance

6. Press the OFF/CLEAR button to display the time of the day.

CAUTION

Do not use the surface burners while the gas oven is performing a self-cleaning cycle.

To delay starting the self-cleaning cycle

04 04

1. Repeat steps 1 and 2 on the previous page.

2. Press the Delay Start button. The oven door locks.

3. Set the time you want the oven to start self-cleaning using the number pad.

4. Press the START/SET button. The oven will start self-cleaning at your specied time.

To cancel the self-cleaning cycle

You may nd it necessary to stop or interrupt a self-cleaning cycle due to smoke in the oven.

To turn off the self-cleaning cycle, press the OFF/CLEAR button. The cycle turns off, but the

door remains locked and the Lock icon blinks until the oven temperature falls below 392 °F

(200 °C).

After self-cleaning

• The door stays locked until the internal oven temperature falls below 392 °F.

• When the oven has cooled down, wipe the oven surfaces with a cloth to remove ash

residue.

• Stubborn stains can be removed using a steel-wool pad. Lime deposits can be removed

using a vinegar-soaking cloth.

• If you are not satised with the cleaning results, repeat the cycle. “HOT” appears on the

display until the oven cools down. Wait until the message disappears, and start a new

cycle.

• The cooling fan automatically runs for certain amount of time after self-cleaning.

CAUTION

Do not attempt to open the oven door immediately after the self-cleaning cycle is complete.

The oven is still very hot when the door unlocks. Escaping hot air and/or steam could burn

you.

NX58J7750S�_AA_AC_DG68-00623A-02_EN.indd 68 2015-06-25 �� 10:16:11

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 167 168

Keine Kommentare

Samsung NX58J7750SG Gebrauchs- und Pflegehandbuch Seite 68