
4_installation
installation
Safety instructions for the installation
This oven may be installed only by an approved electrician. The installer is responsible for
connecting the appliance to the mains and in so doing for observing the relevant safety regulations.
• Ensure protection from live parts when installing the oven.
• The kitchen cabinet in which the oven is built in must satisfy stability requirements as specified
in DIN 68930.
Power connection
If the appliance is not connected to the mains with a plug, a
multi-pole isolator switch (with at least 3 mm contact spacing)
must be provided in order to satisfy safety regulations. The
power cable (H05 RR-F or H05 VV-F, min. 1.5 m, 1.5 ~ 2.5
mm²) must be of sufficient length to be connected to the
oven, even if the oven stands on the floor in front of its built-in
cabinet. Open the rear connection cover of the oven with a
screwdriver and loosen the screws of the cable clamp before
you connect the power lines to the relevant connection
terminals. The oven is earthed via the ( )-terminal. If the oven
is connected to the mains with a plug, this plug must remain
accessible after the oven is installed. Samsung will take no
responsibility for accidents that originate from a missing or
faulty earth connection.
Installation in the cabinet
This is a built-in oven, which needs
to be installed into an upper or
lower cabinet.
• Observe minimum distances.
• Fix oven on both sides using
screws
After installation, remove the vinyl
protective film from the door to the
appliance and the protective film
from the interior surfaces of the
oven.
min. 550
min. 560
min. 50
Upper cabinet Lower cabinet
min. 560
min. 550
min. 590
max. 600
min. 50
min. 600
(NO PF LOGO)BF655-HAC_DG68-00269R-03_EN.indd 4 11/18/2015 5:14:34 PM
Kommentare zu diesen Handbüchern