Samsung SRP-250 Series Betreibershandbuch PDF herunterladen (Seite 17)

Chapter 6. The self test

The self-test checks whether the printer has any problems. If the printer does not function

properly, contact your dealer. The self-test checks the following;

1. Make sure paper roll has been installed properly.

2. Turn on the power while holding down the FEED button. The self-test begins.

3. The self-test prints the current printer status, which provides the control ROM

version and the DIP switch setting.

4. After printing the current printer status, self-test printing will print the following,

and pause (The PAPER LED light blinks).

Self-test printing.

Please press the FEED button

5. Press the FEED button to continue printing. The printer prints a pattern using

the built-in character set.

6. The self-test automatically ends and cuts the paper after printing the

following.

*** completed ***

The printer is ready to receive data when it completes the self-test.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 49 50

Keine Kommentare

Samsung SRP-250 Series Betreibershandbuch Seite 17