Samsung SF-5100P Betriebsanweisung PDF herunterladen (Seite 148)

7.5

Troubleshooting

Scanning problems

Problem Possible cause and remedy

• Make sure that you load the document to be scanned into

the document tray.

• There may not be enough available memory to store the

document you want to scan.

• Graphics are scanned more slowly than text.

• Communication speed becomes slow in scan mode

because a lot of memory is required to analyse and

reproduce the scan image. Set your computer to ECP

mode through the BIOS setting. It will help to

increase the speed. For details on how to set BIOS,

refer to the documentation of your computer.

Insert the document properly and push it down until the

machine grips the document.

Your scanner may be currently used for copying or faxing.

When the current job is completed, try again.

There is not enough memory to save the scan image. Exit all

applications currently open, if not required, in order to save

memory.

You cannot scan a document

into memory.

‘There is no document or

the document is loaded

improperly. Insert the

document properly and try

again’ message appears on

the screen.

‘Scanner is busy receiving or

printing data. When the

current job is completed, try

again’ message appears on

the screen.

The unit scans very slowly.

‘Memory is not enough to

save the scan image. Exit all

applications if not required,

then try again after memory

becomes available’ message

appears on the screen.

1 2 ... 143 144 145 146 147 148 149 150 151 152 153 154 155 156

Keine Kommentare

Samsung SF-5100P Betriebsanweisung Seite 148