
Setting the O timer
When the air conditioner is on;
Remote controller display
1. Press the Timer to select (O ).
- (O ) indicator will keep blinking and you can set the time.
2. Press the
button to set the time.
- You can set the time in half hour unit from 30 minutes (0.5 on the display) ~
3hours and hour unit from 3~24 hours.
- Time can be set from minimum 30 minutes to maximum 24 hours.
3. Press the SET button to complete the O timer setting.
- (O ) indicator and the set time of the timer will be displayed on the remote
controller display and the Timer indicator (
)
will be displayed on the indoor
unit display.
- O timer setting will be cancelled if you don't press the SET button within
10seconds after setting the time. Therefore, check for the (O) indicator on the
remote controller display and the Timer indicator (
)
on the indoor unit display.
Cancel
Press the Timer button select (O ) press the or button
set the timer to press the SET button.
Press the Power (
) button.
• O timer may not work depending on the On/O status of the indoor unit
and the On/O status of the indicator on the remote controller display.
• OnlythelatestsettingtimerwillbeappliedbetweentheOnTimer/O
Timer and
O timer functions.
• Aftersettingthetimer,thesettimewillbedisplayedfor3secondsbefore
it disappears.
Combining On Timer and O Timer
When the air conditioner is o When the air conditioner is on
When set time on On timer is shorter than O timer
Ex) On timer : 3 hours, O timer : 5 hours
- The air conditioner will turn on after 3 hours from the
moment you have set the timer and the air conditioner will
remain on for 2 hours and then turn o automatically.
When set time on On timer is longer than O timer
Ex) On timer : 3 hours, O timer : 1 hour
- The air conditioner will turn o after 1 hour from the
moment you have set the timer and turn on after 2 hours
from the moment it was turned o.
• Set time for the On timer and the O timer should be dierent from each other.
Setting the On/O timer
mode
For a comfortable sleep, the air conditioner will operate in 3 stages in order of Fall asleep Sound sleep Wake up stage.
When the air conditioner is operating in Cool mode;
Remote controller display
1. Press the Timer button to select ( ).
- (
) indicator will keep blinking and you can set the time.
2. Press the
button to set the time.
- You can set the time in half hour unit from 30 minutes (0.5 on the display) ~
3hours and hour unit from 3~12 hours.
- Time can be set from minimum 30 minutes to maximum 12 hours.
- Default time setting for the
mode is 8 hours.
3. Press the SET button to complete the
mode setting.
- (
) indicator and the set time of the mode will be displayed on
the remote controller display.
- Timer indicator (
)
will be displayed on the indoor unit display.
- mode setting will be cancelled if you don't press the SET button within
10 seconds after setting the time. Therefore, check for the ( ) indicator on the
remote controller display and the Timer indicator ( ) on the indoor unit display.
Cancel
Press the Timer button select ( ) press the or button
set the timer to press the SET button.
Additional options available in mode
You can adjust the set temperature by 1 °C within the range of 16 °C~30 °C.
When the mode is on.
In Cool mode : Air ow direction will be adjusted automatically.
Temperature and fan speed change in mode
• Fall asleep: Eases you into sleep by dropping the temperature.
• Sound sleep: Relaxes your body and raises your temperature slightly.
• Wake up: Allows you to wake up from comfortable intermittent air and it makes you feel refreshed.
• Recommended set temperature is between 25
°C ~ 27 °C for cooling.
• If the set temperature is too low, you may feel cold during sleep or catch a cold.
• Optimal operation hour of
mode is 8 hours. Therefore, if the time is set too short or long, you
may not feel as comfortable as you would expect.
• If the
mode is set over 5 hours, Wake up stage will begin when 1 hour is remaining in the
operation time and the air conditioner will stop automatically.
• When the On timer and the
function is set simultaneously, the air conditioner will only apply
the function that was set later.
English-18 English-19
AdvAnced function03
Kommentare zu diesen Handbüchern