Samsung LN46A540P2FXZA Bedienungsanleitung PDF herunterladen (Seite 87)

English - 85

Problem Possible Solution

Image is not stable and may appear

to vibrate when you have a computer

connected to the PC input.

If the setting is not correct, use your computer utility program to change the

display settings.

Your TV supports multiscan display functions within the following

frequency domain:

Horizontal frequency (kHz) 30~60

Vertical frequency (Hz) 60~75

PC Maximum refresh rate (at 60 Hz) 1920 x 1080

➣

Image is not centered on the screen. Adjust the horizontal and vertical position.

The screen position must be adjusted on the output source (i.e. STB) with a

digital signal.

The picture appears distorted in the

corner of the screen.

If “Just Scan” is selected with some external devices, the picture may appear

distorted in the corner of the screen. This symptom is caused by the external

devices, not TV.

The “Resets all settings to the default

values.” message appears.

This appears when you press and hold the EXIT button for a while. The product

settings are reset to the factory defaults.

This TFT LCD panel uses a panel consisting of sub pixels (6 220 800) which require sophisticated technology to produce.

However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of

the product.

BN68-01392J-ENG.indb 85 2008-03-19 ¿ÀÈÄ 2:31:26

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 196 197

Keine Kommentare

Samsung LN46A540P2FXZA Bedienungsanleitung Seite 87