Samsung PN42A410C1DXZA Bedienungsanleitung Seite 30
- Seite / 140
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
English - 30
Setting the Blue Only Mode
This function is for AV device measurement experts. This function displays the blue
signal only by removing the red and green signals from the video signal so as to
provide a Blue Filter effect that is used to adjust the Color and Tint of video equip-
ment such as DVD players, Home Theaters, etc.
Using this function, you can adjust the Color and Tint to preferred values appropriate
to the signal level of each video device using the Red/Green/Blue/Cyan/Magenta/
Yellow Color Bar Patterns, without using an additional Blue Filter.
1
Follow the Activating Picture Options instructions numbers 1 and 2.
(Refer to page 26)
2 Press the ▲ or ▼ button to select Blue Only Mode, then press the ENTER
button.
3 Press the ▲ or ▼ button to select Off or On, then press the ENTER button.
Press the EXIT button to exit.
➢
Blue Only Mode is available when the picture mode is set to Standard or
Movie.
Reducing the Effects of Screen Burn
If screen burn has occurred, you can select a white screen or scrolling to help
remove screen burn artifacts.
1
Follow the Activating Picture Options instructions numbers 1 and 2.
(Refer to page 26)
2 Press the ▲ or ▼ button to select Screen Burn Protection, then press the
ENTER button.
3 Press the ▲ or ▼ button to select Pixel Shift, White, Scrolling, or Side Gray
then press the ENTER button.
P
ress the EXIT button to exit.
• White
This function removes after-images on the screen by changing the color of
pixels to white. Use this function when there are remaining after-images or
symbols on the screen, especially when you displayed a still image on the
screen for a long time.
•
Scrolling
This function removes after-images on the screen by moving all the pixels on
the PDP according to a pattern. Use this function when there are remaining
after-images or symbols on the screen, especially when you displayed a still
image on the screen for a long time.
• Side Gray
When you watch TV with the screen ratio of 4:3, the screen is prevented from
any damage by adjusting the white balance on both extreme left and right
sides.
To prevent the screen burn from happening, select
Dark or Light.
• Dark: When you set the screen ratio to 4:3, it darkens the left and right sides.
• Light: When you set the screen ratio to 4:3, it brightens the left and right sides.
➢
To remove after-images on the screen, use either the White or Scrolling function. Although both functions remove
after-images on the screen, Scrolling is more effective.
➢
The after-image removal function has to be executed for a long time (approximately 1 hour) to effectively remove after-
images on the screen. If the after-image is not removed after performing the function, repeat the function again.
➢
Press any key on the remote control to cancel this feature.
Continued...
Picture OptionsT V
Color Tone : Normal
Size : 16:9
Digital NR : Auto
DNle : Off
HDMI Black Level : Low
Film Mode : Off
Blue Only Mode :
Off
Screen Burn Protection
Enter
Move
Return
Off
On
Picture OptionsT V
Color Tone : Normal
►
Size : 16:9
►
Digital NR : Auto
►
DNle : Off
►
HDMI Black Level : Low
►
Film Mode : Off
►
Blue Only Mode : Off
►
Screen Burn Protection
►
Enter
Move
Return
Screen Burn ProtectionT V
Pixel Shift
►
White
►
Scrolling
►
Side Gray : Light
►
Enter
Move
Return
Pixel ShiftT V
Pixel Shift : On
►
Horizontal Dot : 2
►
Vertical Line : 2
►
Time : 2 min
►
Enter
Move
Return
BN68-01428A_01531A-00Eng_1-60.in30 30 2008-04-18 오후 2:24:16
- Plasma TV 1
- English - 2 2
- User Instructions 3
- Contents 4
- General Information 5
- Viewing the Control Panel 6
- Viewing the Connection Panel 7
- Remote Control 8
- Connections 9
- Connecting Cable TV 10
- HDMI Cable (Not supplied) 11
- Audio Cable (Not supplied)2 11
- Connecting a Camcorder 12
- Connecting a VCR 13
- Optical Cable (Not supplied) 14
- Audio Cable (Not supplied) 14
- D-Sub Cable (Not supplied) 15
- Operation 16
- English - 17 17
- Changing Channels 18
- Adjusting the Volume 19
- Using the TOOLS Button 19
- Viewing the Display 19
- Viewing the Menus 20
- Memorizing the Channels 20
- English - 21 21
- To Select the Source 22
- To Edit the Input Source Name 22
- Picture Control 23
- English - 24 24
- English - 25 25
- Configuring Picture Options 26
- Position Reset 27
- English - 28 28
- English - 29 29
- English - 30 30
- English - 31 31
- Sound Control 32
- Setting the TruSurround XT 33
- Automatic Volume Control 34
- Channel Control 36
- Adding and Erasing Channels 37
- Viewing the Channel Lists 38
- Labeling Channels 39
- Fine Tuning Analog Channels 40
- PC Display 41
- English - 42 42
- English - 43 43
- Time Setting 44
- English - 45 45
- English - 46 46
- Function Description 47
- English - 48 48
- English - 49 49
- Setting the Light Effect 50
- English - 51 51
- Using the V-Chip 53
- English - 54 54
- English - 55 55
- English - 56 56
- English - 57 57
- English - 58 58
- English - 60 60
- Appendix 61
- Troubleshooting 62
- English - 63 63
- English - 64 64
- English - 65 65
- Specifications 66
- This page is intentionally 68
- Écran à plasma 71
- Français - 2 72
- Guide de l’utilisateur 73
- Table des matières 74
- Renseignements généraux 75
- Français - 6 76
- Prises du panneau arrière 77
- Prises du panneau latéral 77
- Télécommande 78
- Branchements 79
- Français - 10 80
- Câble HDMI (non fourni) 81
- CâbleAudio (non fourni) 81
- Câble HDMI/DVI(non fourni)1 81
- Branchement d’un caméscope 82
- Branchement d’un magnétoscope 83
- Câble optique (non fourni) 84
- CâbleAudio (non fourni)2 85
- Câble D-Sub (non fourni) 85
- Câble HDMI/DVI (non fourni)1 85
- Fonctionnement 86
- Français - 17 87
- Changement de canal 88
- Réglage du volume 89
- Affichage des paramètres 89
- Affichage des menus 90
- Mémorisation des canaux 90
- Français - 21 91
- Pour choisir la source 92
- Réglage de l’image 93
- Réglage des détails 94
- Français - 25 95
- Français - 26 96
- Position Régler 97
- Français - 28 98
- • On : Active le mode DNIe 99
- Français - 30 100
- Français - 31 101
- Paramètres audio 102
- Réglage de TruSurround XT 103
- Français - 34 104
- Réglage des canaux 106
- Français - 37 107
- Sélection des canaux favoris 108
- Identification des canaux 109
- Français - 40 110
- Écran d’ordinateur 111
- Français - 42 112
- Français - 43 113
- Réglage de l’horloge 114
- Français - 45 115
- Français - 46 116
- Description des fonctions 117
- Français - 48 118
- Français - 49 119
- Réglage de l’effet lumineux 120
- Français - 51 121
- ($-)). 122
- Fonction Puce V 123
- Français - 54 124
- Français - 55 125
- Français - 56 126
- Français - 57 127
- • G : Général 128
- Français - 60 130
- Fixation du téléviseur au mur 131
- Dépannage 132
- Français - 63 133
- Français - 64 134
- Français - 65 135
- Comment assembler le support 136
- Spécifications 136
- Dimensions (PN42A410C1D) 137
- Cette page est laissée 138
Verwandte Produkte und Handbücher für Fernseher Samsung PN42A410C1DXZA
(90 Seiten)
Fernseher Samsung HL67A750A1FXZA Bedienungsanleitung
(195 Seiten)
(195 Seiten)
Fernseher Samsung LN46A750R1FXZA Bedienungsanleitung
(273 Seiten)
(273 Seiten)
Fernseher Samsung UN85S9VFXZA Bedienungsanleitung
(193 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 3.154 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern