Samsung 173VT Bedienungsanleitung PDF herunterladen (Seite 12)

Connecting Your

Monitor

Installing the

Monitor Driver

Installing a VESA

base

1. Connect the power cord for your monitor to the power port on the back of the monitor.

Plug the power cord for the monitor into a nearby outlet.

2. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.

3. Connect the touchscreen cable to an available serial communication (COM) port on the back of your

computer.

! If the COM port has a 9-pin connector, attach the touchscreen cable directly to the port.

! If the COM port has a 25-pin connector, first attach a 9-pin to 25-pin adapter (not included) to the

end of the touchscreen cable, and then attach the cable to the port.

4. Connect the monitor to the Macintosh computer using the D-SUB connection cable.

5. In the case of an old model Macintosh, you need to connect the monitor using a special Mac adaptor.

6. Turn on your computer and monitor. If your monitor displays an image, installation is complete.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 38 39

Keine Kommentare

Samsung 173VT Bedienungsanleitung Seite 12