Samsung 930MP Bedienungsanleitung PDF herunterladen (Seite 18)

If you connect properly your monitor using the DVI connector but get a blank or fuzzy screen, check

to see if the monitor status is set to analogue. Press Source button to have the monitor double-

check the input signal source.

2. Connecting to a Macintosh

1. Connect the power cord to the DC adapter and then connect the adapter jack to the DC POWER

port on the monitor. (Voltage is automatically adjusted by the power adapter.)

2. Using the D-sub (Analog) connector on the video card.

Connect the signal cable to the D-SUB port on the Macintosh computer.

For older model Macintoshes, you need to adjust the resolution control DIP switch on the Macintosh

adapter (optional) referring to the switch configuration table shown on its rear.

4. Turn on the monitor and Macintosh.

Connecting to other devices

This monitor allows the user to connect it to such input devices as a DVD player, a VCR or a

camcorder, or a DTV or a TV without disconnecting the PC. For detailed information on connecting

AV input devices, refer to User Controls under Adjusting Your Monitor.

The configuration at the back of the monitor may vary from product to product.

1-1. Connecting AV Devices

The monitor has AV connection terminals to connect AV input devices like DVDs, VCRs or

Camcorders. You may enjoy AV signals as long as the monitor is turned on.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 41 42

Keine Kommentare

Samsung 930MP Bedienungsanleitung Seite 18