Samsung SDM-090P Bedienungsanleitung PDF herunterladen (Seite 34)

Digital Multiplexer

6-1

Chapter 6. Recording

1.Normal record mode

When setting the “REC TYPE” of the setup menu “1.REC OUT SET” to “NOR”.

(1) Frame record

- When setting the “REC TYPE” of the setup menu “1.REC OUT SET” to FRAME.

- The image signal entered from the maximum 16 cameras is output in Frame and recorded on the VCR.

- The recorded output records the only channel that the “REC DUTY” of the “1.REC OUT SET” is set to

more than 1.

(2) Field record

- When setting the “REC TYPE” of the setup menu “1.REC OUT SET” to “FIELD”.

- The image signal entered from the maximum 16 cameras is output in Field and recorded on the VCR.

- The recorded output records the only channel that the “REC DUTY” of the “1.REC OUT SET” is set to

more than 1.

2. TIME LAPSE record mode

- When setting the “REC TYPE” of the setup menu “1.REC OUT SET” to “TLV”.

- The image signal entered from the maximum 16 cameras is recorded on the VCR in response to the trigger

signal of VCR.

- The recorded output records the only channel that the “REC DUTY” of the “1.REC OUT SET” is set to more

than 1.

- The trigger out of VCR and the VTR terminal this unit must be connected.

- “NO TRIGGER” character is displayed on screen while operating the field record operation of the normal

mode if the trigger signal is not received for 10 seconds.

1/30sec(NTSC), 1/25(PAL)

1/60sec(NTSC), 1/50(PAL)

Trigger output from TIME LAPSE VCR

SDM-160(gb)00255 6/30/05 11:42 AM Page 6-1

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40 41

Keine Kommentare

Samsung SDM-090P Bedienungsanleitung Seite 34