Samsung DVD-HR725 Bedienungsanleitung PDF herunterladen (Seite 22)

22 - English

Connecting & Setting Up

Case 2

: Connecting to a TV with DVI

Jack

• Using the DVI Adapter Cable, connect the HDMI OUT

jack on the rear of the HDD & DVD RECORDER to

the

DVI IN jack of your TV.

•

Using the audio cables, connect the AUDIO (red and

white) OUT

jacks on the rear of the HDD & DVD

RECORDER to the

AUDIO (red and white) IN jacks of

your TV. Turn on the HDD & DVD RECORDER and TV.

• Press the input selector on your TV remote control

until the DVI signal from the HDD & DVD RECORDER

appears on your TV screen.

■

To use HDMI cable, make the cable

connection before plugging in the power

cord or after finishing the “plug &

autosetup.” Do not connect the HDMI

cable while the “plug & autosetup” is

progressing.

■

Progressive scan automatically activates

when HDMI is connected.

■

If your TV does not have Bitstream

decoder, you must set the digital audio

output to PCM in order to watch through

the HDMI output. (See pages 37~38)

■

Depending on the HDMI device (TV/HDMI

Receiver) you use, audio may not be

supported. If TV/HDMI Receiver does not

support Dolby digital, Audio output is not

available when you set Digital output as

'Bitstream' in Audio setup menu. In this

case, set the digital audio output to PCM.

If TV/HDMI Receiver does not support

DTS, Audio output is not available when

you play disc in DTS format.

■

You can switch from the HDMI output to

other output only in stop mode.

CAUTION

white

red

white

red

 HDMI (High Definition Multimedia

Interface)

HDMI is an interface to enable the digital

transmission of video and audio data with just a

single connector. Since HDMI is based on DVI, it is

completely compatible with DVI. The only difference

between HDMI and DVI is that HDMI supports multi-

channel audio.

Using HDMI, the HDD & DVD RECORDER transmits

a digital video and audio signal and displays a vivid

picture on a TV having an HDMI input jack.

 HDMI connection description

HDMI connector - Both uncompressed video data

and digital audio data (LPCM or Bit Stream data).

- Though the HDD & DVD RECORDER uses a

HDMI cable, the HDD & DVD RECORDER

outputs only a pure digital signal to the TV.

- If TV does not support HDCP (High-

bandwidth Digital Content Protection),

snow noise appears on the screen.

 Why does Samsung use HDMI?

Analog TVs require an analog video/audio

signal. However, when playing a DVD, the

data transmitted to a TV is digital. Therefore

either a digital-to-analog converter (in the

HDD & DVD RECORDER) or an analog-to-

digital converter (in the TV) is required.

During this conversion, the picture quality is

degraded due to noise and signal loss.

HDMI technology is superior because it

requires no D/A conversion and is a pure

digital signal from the HDD & DVD

RECORDER to your TV.

 What is the HDCP?

HDCP (High-bandwidth Digital Content

Protection) is a system for protecting DVD

content outputted via HDMI from being

copied. It provides a secure digital link

between a video source (PC, DVD. etc) and

a display device (TV, projector. etc). Content

is encrypted at the source device to prevent

unauthorized copies from being made.

NOTE

• Press the input selector on your TV remote control

until the HDMI signal from the HDD & DVD

RECORDER appears on your TV screen.

02-00852S-XSA_18-23_CON 2005.7.1 8:51 PM Page 22

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 130 131

Kommentare zu diesen Handbüchern

Keine Kommentare

Samsung DVD-HR725 Bedienungsanleitung Seite 22

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für DVD Spieler Samsung DVD-HR725