Getting Connected
Getting Connected
9
1. Connecting DVD Recorder-VCR to the TV using
the RF Cable
1. Remove the aerial or network input cable from
the television.
2. Connect this cable to the 75Ω coaxial socket
marked on the rear of your DVD Recorder-
VCR.
3. Plug the RF cable supplied into the socket
on your DVD Recorder-VCR.
4. Plug the other end of the RF cable into the
connector previously used for the aerial on the
television.
3. Connecting DVD Recorder-VCR to a Satellite
Receiver or Other Equipment
You can connect your DVD Recorder-VCR to a
Satellite receiver or other DVD Recorder-VCR
using the SCART cable if the appropriate outputs
are available on the equipment chosen. The fol-
lowing illustrations give a few examples of the
connection possibilities.
1. AV1(EURO AV): By means of 21-pin Scart
Cable
Plug the SCART Cable with satellite receiver or
other equipment into the AV1 (EURO AV) sock-
et on the rear of the DVD Recorder-VCR. After
making this connection, select the source by
pressing the INPUT SEL. button for the AV1
input sources.
2. By means of RF Cable
After making this connection, you must preset
the station received through the satellite tuner.
RF output channel of the satellite receiver
should be adjusted away from channel 60,
which is used by the DVD Recorder-VCR, e.g.
re-adjust to channel 65.
3. AV2 IN: By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or
other equipment into the AV2 (DEC./EXT.)
socket on the rear of the DVD Recorder-VCR.
After making this connection, select the source
by pressing the INPUT SEL. button for the AV2
input sources.
4. By means of RF Cable
After making this connection, you must preset
the station received through the satellite tuner.
RF output channel of the satellite receiver
should be adjusted away from channel 60,
which is used by the DVD Recorder-VCR, e.g.
re-adjust to channel 65.
Antenne
Satellite Receiver or other
Equipment
2. Connecting DVD Recorder-VCR to the TV using the SCART Cable
You can connect your DVD Recorder-VCR to the television using the SCART cable if the
appropriate input is available on the television. You thus:
• Obtain better quality sound and pictures
• Simplify the setting up procedure of your DVD Recorder-VCR
• Regardless of the type of connection chosen, you must always connect the RF cable
supplied. Otherwise, no picture will be visible on the screen when the DVD Recorder-
VCR is switched off.
• Make sure that both the television and the DVD Recorder-VCR are switched off before
connecting the cables.
1. Connect the RF cable as indicated in the previous previous section.
2. Connect one end of the SCART cable to the AV1 (EURO AV) socket on the rear of the
DVD Recorder-VCR.
3. Plug the other end into the appropriate connector on the television.
(39 Seiten)
(160 Seiten)
(16 Seiten)
(104 Seiten)
(109 Seiten)
(59 Seiten)
(47 Seiten)
(28 Seiten)
(324 Seiten)
(222 Seiten)
(71 Seiten)
(51 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern