Samsung SCX-6322DN Wartungshandbuch PDF herunterladen (Seite 55)

Samsung Electronics

Service Manual

5-1

5.2 Rear Cover

1. Remove the six screws securing the Rear Cover. 2. Separate the rear cover from the base frame and

Scanner Ass'y.

Rear Cover

5. Disassembly and Reassembly

5.1 General Precautions on Disassembly

When you disassemble and reassemble compo-

nents, you must use extreme caution. The close

proximity of cables to moving parts makes proper

routing a must.

If components are removed, any cables disturbed

by the procedure must be restored as close as

possible to their original positions. Before remov-

ing any component from the machine, note the

cable routing that will be affected.

Whenever servicing the machine, you

must perform as follows:

1. Check to verify that documents are not stored

in memory.

2. Be sure to remove the toner cartridge before

you disassemble any parts.

3. Unplug the power cord.

4. Use a flat and clean surface.

5. Replace only with authorized components.

6. Do not excessive force on components made of

plastic, they may break.

7. Make sure all components are in their proper

position.

Releasing Plastic Latches

Many of the parts are held in place with plastic

latches. The latches break easily; release them

carefully.

To remove such parts, press the hook end of the

latch away from the part to which it is latched.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 184 185

Keine Kommentare

Samsung SCX-6322DN Wartungshandbuch Seite 55