Fast Track Troubleshooting
Model:
FX510BGS/XAA
FX710BGS/XAA
IMPORTANT SAFETY NOTICE – “For Technicians Only” This service data sheet is
intended for use by persons having electrical, electronic, and mechanical experience
and knowledge at a level generally considered acceptable in the appliance repair trade.
Any attempt to repair a major appliance may result in personal injury and property
damage. The manufacturer or seller cannot be responsible, nor assume any liability for
injury or damage of any kind arising from the use of this data sheet.
Door Lock Mtr 120vac 1750 ~ 1850Ω
Component Voltage Current Ω @ Room Temp
Conv Fan
120vac
20 ~ 30Ω
Broil H S I 120vac
40 ~ 400Ω
Sub Fan
120vac
85 ~ 100Ω
Bake H S I 120vac
Degree ºF Ω Degree ºF Ω Convect 240vac 800 W 70 ~ 73Ω
0 932.12 104 1151.38 Warm Dr 120vac 600 W 22 ~ 25Ω
Oven Temp Sensor Resistance Chart
SUPPORT INFORMATION
Training — Plus One
http://my.plus1solutions.net/
WARNING
Disconnect power before servicing the
range. Replace all panels before operat-
ing range. Failure to do so can result in
death or electrical shock.
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION
HAZARD
Shut off gas supply to the range before servic-
ing. Check all gas lines and fittings for leaks
before operating the range. Replace all panels
before operating range. Failure to do so can
result in death or personal injury from explo-
sion, fire, or asphyxiation.
CAUTION
When you work on the gas
range, be careful when han-
dling sheet metal parts. Sharp
edges may be present, and you
can cut yourself if you are not
careful.
Operation Notes:
Convection Fan Operation - During normal Oven operation, the Convection Fan for
both the FX510 and the FX710 will cycle on and off. The ‘on’ time is ~ 10 secs. The
‘off’ time will vary from ~ 40 to 60 secs. This is normal operation and does not require
any service action.
Checking Error Codes:
There are two kinds of error codes. One denotes an oven temperature sensor error and the other de-
notes a safety error. Possible error codes during use can be checked before service.
1. Press Clock pad to select “AM” or “PM”. Each time the pad is pressed, the display toggles to the other setting.
The default setting is “PM”
2. Press the number pads 1,2,3 and 4. Make sure the Kitchen Timer and Warming Drawer are both turned OFF.
3. Press the Start pad.
4. Press the Custom Cook and the 0 number pads at the
same time for 2 seconds. Error codes are displayed.
5. Press the 0 number pad, to display the latest 5 error codes.
If the power is interrupted and the oven turns off, the stored error codes are deleted.
6. Press the Clear/Off pad to return to normal display mode.
Publication # tsFXx10 Revision Date 12/2/2011
Kommentare zu diesen Handbüchern