Samsung SPR-7416 Betriebsanweisung PDF herunterladen (Seite 32)

3-3

Input Sensor No.

: Select whether to use the sensor inerworking the camera.

: The sensor interworks with the corresponding camera.

: The sensor does not interwork with the corresponding camera.

If a signal is generated is inputted in the sensor interworking with the camera, camera

images will be recorded according to the frame rates setting.

Input Motion No.

: Select whether to use the motion inerworking the camera.

: The motion interworks with the corresponding camera.

: The motion does not interwork with the corresponding camera.

Select time(S)

: Set the Time to record camera images when signals are inputted in the sensor or motion

Interworking with each camera during an emergency. (The conversion time is from 3

seconds to 3 minutes.)

Description

Video loss Alarm

: Alarm and beep are generated through he control number that is inerlocked when Video

Video Loss is generated.

1) Alarm

When Alarm button is pressed : Alarm is activated.

When Alarm button is released : Alarm is not activated.

2) Beep

When Beep button is pressed : Beep is activated.

When Beep button is released : Beep is not activated.

3) Alarm Duration

You can set he duration when alarm and beep tone are generated by this function.

You can select a control number that is interlocked by Control Interlocking when Video

Loss is generated.

Duration can be set by hour , minute or seconds.

Recording/Display [Display]

3-3

Environment Setup

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 71 72

Keine Kommentare

Samsung SPR-7416 Betriebsanweisung Seite 32