
30_ surveillance mode
surveillance mode
To Use Channel Search
You can use one channel search for a channel (camera) in the SURVEILLANCE (live) screen.
Normal play
In the SURVEILLANCE (live) screen,
click <One channel search>.
The <One channel search> window
appears.
Select a channel (camera) to be
searched in the <One channel search>
window.
You can also select a channel (camera)
to be searched in the search panel.
If the <One channel search> window
opens, check if the channel to be
searched is the same as the channel in the search window.
Click <Play> button.
Rewinds by the time set in <Skip back time> and plays the recording.
You can also use the play button in the search panel.
You can set play time in <Custom Setup>-<Skip back time>.
(Default <Skip back time> value is 30 seconds.)
E.g. when <Skip back time> is set to the default value (30 seconds)
If the latest recording data is 12:30:00.
- clicking the play button in one channel search plays the recording from 12:29:30.
Other Search Menus
In the SURVEILLANCE screen, click the <One channel search>
button.
The search menu on the right side is activated.
Smart Search
Select an area in <One channel search>. Then a motion is detected in the specifi ed area, the play is
stopped.
Map Search
Shows the 24 hour recording status map for all the channels (cameras).
You can select a time range to be played on the recording map.
Text Search
You can search for a recording, with the text entered in the POS or ATM.
Event Search
You can search for a recording, with motion, sensor or the text entered during the recording.
When the recorder plays back a one-frame (FPS) recording and the selected starting frame is a P-frame, it will start from
the closest I-frame, which may result in playing data as earlier as 30 seconds in maximum than the seek time.
1.
2.
J
3.
J
1.
2.
3.
4.
J
① ② ③④
②
③
③
②
①
02093A-SNR-1162-ENG.indb 3002093A-SNR-1162-ENG.indb 30 2008-11-07 오후 2:31:222008-11-07 오후 2:31:22
Kommentare zu diesen Handbüchern