Samsung RF23HTEDBSR Handbuch PDF herunterladen (Seite 21)

English - 21

OPERATING

( 2 )

Alarm

/ Filter

Reset

(3sec)

The Alarm button serves two purposes:

- To turn the door open alarm on and off

- To reset the water ﬁ lter life indicator.

1. Door Alarm Function

If the door alarm is set to On, an alarm

beeps if any refrigerator door is left open

for more than three minutes.

The beeping stops when you close the

door.

The door alarm function is pre-set to On in

the factory.

You can turn it off by pressing and then

releasing the Alarm button.

You can turn it back on in the same

fashion.

The icon lights up when the function is on.

When the Door Alarm function is on and

the alarm sound is triggered, the Door

Alarm Icon will blink while the alarm

sounds.

2. Water Filter Life Indicator Function

After you replace the water ﬁ lter, touch and

hold this button for 3 seconds to reset the

water ﬁ lter life indicator.

When you reset the water ﬁ lter life indicator,

the Filter icon on the panel turns Off.

The Filter icon will turn red to let you know

it is time to change the water ﬁ lter after six

months (about 300 gallons).

Some areas have large amounts of lime in

their water, which causes the water ﬁ lter to

clog more quickly.

If this is the case in your area, you will have

to change the ﬁ lter more frequently than

every six months.

( 3 )

Energy

Saver /

Override

(3sec)

The Energy Saver/Override (3sec) button

serves two purposes:

- To turn the Energy Saver function on

and off.

- To turn the Override function on and off.

1. Energy Saver function

Touching this button turns Energy Saver

mode on and off.

When you turn Energy Saver on, the

Energy Saver icon lights.

Turn Energy Saver off and the icon goes

off.

The Energy Saver function automatically

turns on when power is supplied to the

refrigerator.

If condensation or water drops appear on

the doors, turn the Energy Saver mode off.

2. Override function

The Override function activates/deactivates

Smart Grid (page 25). Press the Energy

Saver/Override button for 3 seconds to

set/clear the Override function.

( 4 )

Fridge /

Power

Cool

(3sec)

The Fridge button serves two purposes:

- To set the Fridge to your desired

temperature.

- To turn the Power Cool function on

and off.

1. To set the Fridge temperature, press

the Fridge button.

You can set the temperature between

44°F (7°C) and 34°F (1°C).

2. Power Cool function

Touch and hold this button for 3 seconds

to decrease the time needed to cool

products in the Refrigerator.

It can be helpful if you need to quickly cool

easily spoiled items or if the temperature in

the fridge has warmed dramatically.

(for example, if the door was left open)

( 5 )

Lighting

/ °C↔°F

(3sec)

The Lighting button serves two purposes:

- To turn the dispenser light on and off

- To switch the temperature units

between ºC and ºF.

1. Light Function

Touching the Lighting button turns on the

Dispenser LED lamp in continuous mode

so that it stays on continuously.

The button also lights up.

If you want the Dispenser lamp to come on

only when some one uses the dispenser,

press the Lighting button to turn the

continuous mode off.

2. To switch the temperature units

between ºC and ºF.

Touch and hold this button for 3 seconds

to select the temperature display you want.

Each time you press and hold the button,

the ºC and ºF temperature modes alternate

and the ºC or ºF icon lights up, indicating

your selection.

DA68-02954B-04.indb 21DA68-02954B-04.indb 21 2015. 4. 24.  3:062015. 4. 24.  3:06

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 143 144

Kommentare zu diesen Handbüchern

Keine Kommentare

Samsung RF23HTEDBSR Handbuch Seite 21

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kühlschränke Samsung RF23HTEDBSR