Samsung C61R2AAST Bedienungsanleitung PDF herunterladen (Seite 330)

Installing the Hob

Important: Be sure the new appliance is installed and grounded only by qualiﬁed

personnel. Please observe this instruction. The warranty will not cover any damage that

may occur as a result of improper installation. Technical data is provided at the end of

this manual.

Safety instructions for the installer

• A device must be provided in the electrical installation that allows the appliance to be

disconnected from the mains at all poles with a contact opening width of at least 3 mm. Suitable

isolation devices include line protecting cut - outs, fuses (screw type fuses are to be removed

from the holder), earth leakage trips and contactors.

• With respect to re protection, this appliance corresponds to EN 60335 - 2 - 6. This type of

appliance may be installed with a high cupboard or wall on one side.

• Drawers may not be tted underneath the hob.

• The installation must guarantee shock protection.

• The kitchen unit in which the appliance is tted must satisfy the stability requirements of DIN

68930.

• For protection against moisture, all cut surfaces are to be sealed with a suitable sealant.

• On tiled work surfaces, the joints in the area where the hob sits must be completely lled with

grout.

• On natural, articial stone, or ceramic tops, the snap action springs must be bonded in place

with a suitable artiﬁcial resin or mixed adhesive.

• Ensure that the seal is correctly seated against the work surface without any gaps. Additional

silicon sealant must not be applied; this would make removal more dicult when servicing.

• The hob must be pressed out from below when removed.

C61R2AEEP_BOL_DG68-00125D-04_EN_161107.indd 10 2016-11-07 �� 10:57:08

1 2 ... 325 326 327 328 329 330 331 332 333 334 335 ... 351 352

Keine Kommentare

Samsung C61R2AAST Bedienungsanleitung Seite 330