Samsung SRP-275 Betreibershandbuch PDF herunterladen (Seite 102)

5-112

5-113

Auto status

Header 1 (First byte)

Transmission byte count = 9 = 00100011B (23 Hex)

Bit Contents

Status

Fixed at "0"

Reserved (Fixed at "0")

Printer status Byte count

Fixed at "0"

Printer status Byte count

Fixed at "0"

"0"

"1"

checked

Header 2 (Second byte)

Version No.n = 3 = 00000110B (06 Hex)

Bit Contents

Status

Fixed at "0"

Version No.

Fixed at "0"

Version No.

Fixed at "0"

"0"

"1"

checked

Printer status 1 Printer status (Third byte)

Bit Contents

Status

Fixed at "0"

OFFLINE by switch input

Cover status

Fixed at "0"

ONLINE/OFFLINE status

Drawer kick-out connector status

<ETB> command

Fixed at "0"

"0"

ON-LINE

OPEN

Not executed

"1"

Yes

Open

OFF-LINE

Executed

CONTROL COMMANDS LIST

CHAPTER 5

ESC ACK SOH

[Name] Inquire status

[Format] ASCII ESC ACK SOH

Hex 1B 06 01

Decimal 27 6 1

[Range] ------

[Default] ------

[Description] This command is effective only when using an interface capable of

bi-directional data communications. When this command is received,

the printer sends the status in real time to the host (not taking it from the

reception buffer, but executing it immediately upon reception from the host).

Bi-directional parallel interfaces enter a "data present" state. When in the serial

interface DTR mode, and using a parallel interface, set so that the status can

be inquired even when offline for errors, etc. When this command is sent once

to the printer, do not send the next ESC ACK SOH command until the final

auto status has been received.

[Note] Refer to following tables(Auto status)

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 108 109 110

Kommentare zu diesen Handbüchern

Keine Kommentare

Samsung SRP-275 Betreibershandbuch Seite 102

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucken & Scannen Samsung SRP-275