Samsung ML-2552W Spezifikationen PDF herunterladen (Seite 74)

6-3

Samsung Electronics

ALIGNMENT & ADJUSTMENTS

Service

Manual

6.1.2.1 Interface Test (Main controller and Tray3 controller)

- This Function is used to check the communication state between the main controller and the tray

3 controller.

1. Press the "Menu Key", until finding "Interface Test" message on the panel.

2. Press the "Select Key", when it's found.

Sub Menu Description Display (LCD)

Tray2 Interface After it is on the test, confirm a message on the panel. Tray 2 I/F : PASS(FAIL)

The I/F is normal for the message, "PASS" and

abnormal for the message, "FAIL" on the bottom line.

6.1.2.2 Test Pattern and Paper path

- These Functions are considered to check the total print process state.

- On the EDC mode, a Test pattern is able to be printed. While the printing job is processing, the

location of the paper is continuously displayed.

1. Press the “Menu Key” until finding “Test Pattern Print” message on the panel.

2. Press the “Select Key”, when it’s found.

3. Confirm the message “Choose a tray: 1”(default: 1).

4. Press the “Arrow keys” (< / >) to select a tray you would like to choose.

5. Fill a Tray(1, 2, 3) with papers.

5. Press the “Select Key”, if you would like to print it.

Location order: Pick up a Feed On → Exit On → Feed Off → Exit Off → End

(It is possible that Feed Off → Exit On, when a paper size is small)

Sub Menu Description Display (LCD) Remark

Test Pattern Print The test pattern is printed after the execution Pattern Print Example ->

key is chosen and “More?” is displayed. (Location) Pattern Print

Press the “Select Key” for printing more, : Exit On

the “Cancel Key” for stopping.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 175 176

Keine Kommentare

Samsung ML-2552W Spezifikationen Seite 74