Samsung LNB50 Bedienungsanleitung PDF herunterladen (Seite 27)

$P&&&+&80LFURFRQWUROOHU&'38VHU¶V0DQXDO



Connecting a ROM-ICE to the Main Board

Follow the steps below to connect a ROM-ICE to the Am186CC/CH/CU

microcontroller customer development platform main board:

1. Orient the main board such that the AMD logo is in the lower righthand corner,

facing you.

2. Set the jumpers according to the configuration shown in Table 1-1 on page 1-7,

and jumper your chip select on JP10 (see location F-9 in Figure 2-2 on

page 2-3).

3. Position the ROM-ICE to the left of the main board.

4. Connect the ROM-ICE Low into the left DIP socket (see U28 at location B-12),

which is labeled SRAM/ROM LOW.

5. Connect the ROM-ICE High into the right DIP socket (see U25 at location

D-12), which is labeled SRAM/ROM HIGH.

Table 1-1. ROM-ICE Configuration

'HYLFH

-3 -3 

9LVXDO'HWDLO

3/% 36(/ 36(/ 36(/ 36(/ 3+%

about.book Page 7 Monday, June 7, 1999 10:17 AM

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 167 168

Keine Kommentare

Samsung LNB50 Bedienungsanleitung Seite 27