Samsung SEK-2000 Bedienungsanleitung PDF herunterladen (Seite 45)

36 37

In the IP Settings screen, set IP Setting to Enter Manually.

IP Settings

IP Setting Enter manually

IP Address 0.0.0.0

Subnet Mask 0.0.0.0

Gateway 0.0.0.0

DNS Setting Enter manually

DNS Server 0.0.0.0

OK Cancel

Select IP Address. When the IP Address entry window appears, enter three digits into each field

on the IP Address line. When done, select OK.

Press the 버튼더보기 button. The On-Screen Remote appears. Use the On-Screen Remote to enter

numbers.

Repeat the process for Subnet Mask, Gateway, and DNS Server. When done, select OK.

The TV attempts to connect to the network again using the settings you entered. Once it has

established the connection, it displays a confirmation message. Select OK.

The network connection speed may differ depending on the DNS server settings.

For details on the DNS server settings, contact your Internet service provider (ISP).

Connecting to a Wireless Internet Network with WPS

Network > Network Settings

With wireless routers that support WPS (Wi-Fi Protected Setup) or PBC (Push Button Configuration),

it's possible to press a button on the router to connect the TV to the Internet.

This functionality is not available with wireless routers that do not support WPS. Check to see if your

wireless router supports WPS.

Setting the Network type to Wireless automatically displays a list of available wireless networks.

Select WPS(PBC) and then press the WPS or PBC button located on the wireless router within two

minutes.

The TV exchanges the network name (SSID) and security key automatically and then attempts to

connect to the Internet. A confirmation message appears once a connection is established. Select

OK.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 188 189

Keine Kommentare

Samsung SEK-2000 Bedienungsanleitung Seite 45