Samsung BD-J7500 Bedienungsanleitung PDF herunterladen (Seite 11)

11 English

03 Connections

Connections

Connecting to a TV

Connect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV.

- Do not connect the power cord to the wall outlet until you have made all the other connections.

- When you change the connections, turn off all devices before you start.

| NOTES |

To use the Anynet+ (HDMI-CEC) function, connect the HDMI cable to the HDMI 1 terminal.

If you connect the cable to the HDMI 2 terminal, the Anynet+ (HDMI-CEC) function will not be available.

- The HDMI 2 terminal does not output a video signal.

If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the DIGITAL AUDIO OUT on the

product to an audio system to hear audio.

An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.

Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.

When you connect the product to your TV using an HDMI cable or to a new TV, and then turn it on for the first time, the

product automatically sets the HDMI output resolution to the highest supported by the TV.

A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu.

To view video in the HDMI 720p, 1080i, 1080p or 2160p output mode, you must use a high speed (category 2) HDMI cable.

HDMI outputs only a pure digital signal to the TV.

If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.

Audio

Video

[BD-J7500-ZN]AK68-02613R-00ENG-.indd 11 2015-03-03 오전 11:13:52

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 191 192

Keine Kommentare

Samsung BD-J7500 Bedienungsanleitung Seite 11