20
Technical instructions
■ Do not modify this appliance.
■ This appliance must be installed by an authorised technician or
installer.
■ Prior to installation, ensure that the local distribution conditions
(nature of the gas and gas pressure) and the adjustment of the
appliance are compatible.
■ The adjustment conditions for this appliance are stated on the label
(or data plate).
■ This appliance is not connected to a combustion products evacuation
device. It shall be installed and connected in accordance with current
installation regulations. Particular attention shall be given to the
relevant requirements regarding ventilaton.
■ Before installing, turn off the gas and electricity supply to the
appliance.
■ All appliances containing any electrical components must be earthed.
■ Ensure that the gas pipe and electrical cable are installed in such a
way that they do not touch any parts of the appliacne which become
hot.
■ Gas pipe or connector shouldn’t be bent or blocked by any other
appliances.
■ Check the dimensions of the appliance as well as the dimensions of
the gap to be cut in the kitchen unit.
■ The panels located above the work surface, directly next to the
appliance, must be made of non-ammable material. Both the strati-
ed surfacing and the glue used to secure it should be heat resistant,
to prevent deterioration.
■ Turn on appliance tap and light each burners.
Check for a clear blue ame without yellow tipping.
If burners shows any abnormalties check the following :
- Burner lid on correctly
- Flame spreader positioned correctly
- Burner vertically aligned with injector nipple
■ A full operational test and a test for possible leakages must be carried
out by the tter after installaion.
■ The exible hose shall be tted in such a way that it cannot come into
contact with a moveable part of the housing unit and does not pass
through any space susceptible of becoming congested.
Appliance Specication
Model GN7A2IFXD
Pan Support
Cast Iron
Wok pan Support
O (only use for Triple crown burner)
Top Plate
Stainless steel
Control Handle
Silver color
Weight
16kg
Dimension (WxDxH)
750*510*52
Ignition device
Continuous Ignition Type
Gas Connection
1/2 inch female thread
Electric supply
220~240V, 50/60Hz
Burner Feature
Triple-Crown (1EA), Rapid(1EA), Semi-rapid (2EA), Auxiliary (1EA)
○ APPLIANCE CLASS : Class 3
○ APPLIANCE CATEGORY :
BE/FR
GB/IT/PT/LT/ES/CZ/SK
PL
Cat. II 2E+3+ II 2H3+ II 2E3B/P
P(mbar) 20/25 - 28-30/37 20 - 28-30/37 20-36
HU NL
Cat. II 2H3B/P II 2L3B/P
P(mbar) 25-30 25 - 28-30
Engineers technical data
Kommentare zu diesen Handbüchern