Samsung MYSONO U6 Bedienungsanleitung PDF herunterladen (Seite 197)

5-23

Chapter 5 Measurements and Calculations

Soft Menu

The following soft menu options are available for each application while a measurement is in progress:

[Figure 5.2 Mid-Measurement Soft Menu by Application]

 HR Cycle

Activated when measuring the heart rate in M or D mode. Rotate the soft menu’s [1] dial-button

and adjust the heart rate cycle to between 1 and 20.

 Package

Select a measurement package by pressing the [1] dial-button beneath the soft menu. Each press

of the button changes the application.

 Trace Direction

Used to change the doppler spectrum’s trace direction. Rotate the [2] dial button beneath the soft

menu and select from Up, Down, and All. This is enabled only after Auto or Limited Trace is carried

out in Spectral Doppler Mode.

X

Up: Only the ‘+’ part of the doppler waveform is traced.

X

Down: Only the ‘-’ part of the doppler waveform is traced.

X

All: All parts of the doppler waveform are traced.

 Tab

Select a measurement package by rotating the [2] dial button beneath the soft menu. Each press of

the button changes the menu tab within the current application.

 Threshold

Set by rotating the soft menu’s [3] dial-button. This is enabled only after Auto or Limited Trace is

carried out in Spectral Doppler Mode. Adjusting the threshold facilitates contouring of the doppler

spectrum.

 Laterality

Select whether you want to measure the left (Lt) or Right (Rt) side of an object by pressing the [3]

dial-button beneath the soft menu. This option appears on the menu only with certain applications.

1 2 ... 192 193 194 195 196 197 198 199 200 201 202 ... 281 282

Keine Kommentare

Samsung MYSONO U6 Bedienungsanleitung Seite 197