Samsung SCR-3000 Bedienungsanleitung PDF herunterladen (Seite 26)

3-2

Recognizing incoming video signal

The SCR-3000N/SSC-Dual system only recognizes NTSC signal inputs only when booting. The

system will not recognize PAL signals, and a disrupted output would result in a PAL signal were

connected to the system’s input. When this occurs, power-down the system and connect an NTSC

signal to the input. The system then initializes to NTSC signals on power-up. On the other hand, the

SCR-3000P system only recognizes PAL signal inputs. Please connect the video signals appropriate

for each model.

If no HDD is installed or if the system is turned on while the hard drive rack is unlocked, the system

will boot up and the Live screen will appear, but the system will not be able to find the HDD. As

shown below, the HDD icon ( ), will not appear.

2003-06-01 12:00:00

Power Off

Push the power switch down in order to turn off the system.

When the system power is turned off during recording, recording will be resumed next time the

system power is turned on and booting is complete.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 93 94

Keine Kommentare

Samsung SCR-3000 Bedienungsanleitung Seite 26