5-6
(3) FROM MOTION EVENT LIST
FROM MOTION EVENT LIST allows you to back up the video and audio data that has been
recorded on the hard drive at the time of an event, which is triggered by motion detection,
onto a video tape. The following illustration shows the FROM MOTION EVENT LIST
screen in detail. The EVENT (MOTION), DATE and TIME indicate when the event was
recorded on the hard drive. To exit this screen and return to the MANUAL ARCHIVE menu,
press the MENU button.
Use the UP () and DOWN (❷) buttons to select the event you want to back up. A highlight-
ed cursor should appear over the selected item. Press the ENTER ( ) button to accept the
choice to set the event to [O]. Repeat this procedure for each event you want to back up, and
then press the RECORD ( ) button to start the backup. The earliest event occurrence will
be backed up first.
Once the backup starts, the following information will be displayed.
MOTION EVENT ARCHIVE [01/03]
ID EVENT DATE TIME
01
MOTION
2003-07-13 22:42:16
[X]
02
MOTION
2003-07-12 14:24:45
[X]
03
MOTION
2003-07-11 06:13:52
[X]
MOVE=[/❷/
➛
/
❿
] START=[ ] EXIT=[MENU]
Event Index
MACHINE : SCR-3000 MACHINE 1
RECORD START : 2003-06-14 09:45:28
CH No. : 1
REC MODE : 60.00 FPS
ARCHIVING START : 2003-06-14 09:55:35
ARCHIVING METHOD : MANUAL
ARCHIVE
2003-06-14 09:45:45
Note
Note
- If MULTIPLEXER in the SYSTEM SETUP menu of the DVR MAIN MENU is set to
WITH, MOTION EVENT ARCHIVE will be disabled. To perform the backup, set
MULTIPLEXER in the SYSTEM SETUP menu to WITHOUT.
Kommentare zu diesen Handbüchern