Samsung MIM-B17 Bedienungsanleitung PDF herunterladen (Seite 61)

E-60

Binary data of the selected device will be displayed in Binary

data.

 Object ID: Displays ID of the corresponding object.

 Type: Displays type of the corresponding object.

- BI: Input (Read Only)

- BO: Output (Read/Write)

- BV: Value (Read/Write)

 Object Name: Displays the name of the corresponding

object.

 Value: Displays the current value of the corresponding

object.

- It will be displayed either On or Off

You can select the values to modify the Output type

objects. Click [Edit] button on the bottom of the 'Device

configuration' screen and select the value from On or Off

when the button enables.

Click [Save] after setting is completed.

 If you click [Cancel], buttons will be disabled and the

[Cancel] button will be switched to [Edit].

When message with “Reading data from DMS. Please wait”

appears saving is completed. Then, 'Device configuration'

screen appears again as all items are disabled.

Multi-state Data of the selected device will be displayed in

Multi-state data.

 Object ID: Displays ID of the corresponding object.

 Type: Displays type of the corresponding object.

- MI: Input (Read Only)

- MO: Output (Read/Write)

- MV: Value (Read/Write)

 Object Name: Displays the name of the corresponding

object.

 Value: Displays the current value of the corresponding

object.

BACnet Gateway setting (Continued)

SOL_DMS2&BAC&LW_IBIM_EN_32138A-10_EN_150617.indd 60 2015-06-18 오후 5:34:18

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 107 108

Keine Kommentare

Samsung MIM-B17 Bedienungsanleitung Seite 61