
4-8
Operation Manual
FSI / M Line
Use the
Soft Menu
dial-button
[3]
.
X FSI
Select a value between 1 and 3 by rotating the
Soft Menu
dial-button
[3]
. FSI stands for Full Spectrum
Imaging. An image can be combined with the data obtained in 2D Mode using frequencies with
various characteristics. Therefore the resolution is improved in a shallow area for observation and the
penetration is improved in a deep area for observation.
X M Line
An M line is displayed on an image. Press the
Soft Menu
dial-button
[3]
to turn it on or o. The M line
indicates where the observing image is located in the 2D image when M Mode or PW Mode is used
with 2D mode.
Read Zoom / Write Zoom
Use the
Soft Menu
dial-button
[4]
.
You can magnify an image. The zoom function is categorized as Read Zoom and Write Zoom according
to magnication methods.
X
Read Zoom: Magnies the images stored on the hard disk drive.
1.
Rotate the dial-button to the left or right.
2.
Adjust the location of the Zoom box using the
Trackball
. The location of the Zoom box on the
image can be found through the Zoom Navigation box on the top left side of the screen.
3.
Observe the magnied image. Rotate the dial-button clockwise to magnify the image.
X Write Zoom: Magnies and scans an image in real time.
1.
Press the dail-button to select Write Zoom box.
2.
The image is magnied and scanned. Use the
Change
button to adjust the location and size of
the Zoom box. Every time the
Change
button is clicked, the current status of the Zoom box is
displayed on the bottom left of the screen.
−
PreZoom position: The location of the Zoom box can be changed. Move the Zoom box using
the
Trackball
.
−
PreZoom size: The size of the Zoom box can be changed. Use the
Trackball
to adjust the size
of the Zoom box.
If you change the depth of the image when using the Write Zoom function, the Zoom mode ends
automatically.
Kommentare zu diesen Handbüchern