
6-3
Chapter 6 Starting Diagnosis
System Power
Boot up the system for use.
CAUTION: Make sure to connect the probes and peripheral devices that will be used before
powering on the system. If you attempt to connect them during system use, it may lead to patient
injury or irreparable damage to the console.
Turning the Power On
Press the On/O button when the power is o. Booting begins, and the product logo appears on the
screen. When booting is completed, the 2D mode screen appears in End Exam status.
CAUTION: Before starting the diagnosis, you must register the patient information.
NOTE:
X
The product should turn on about 10 seconds after the power switch at the back of the
product is turned on.
X
During system booting, do not press any key on the keyboard. It may cause product
malfunction.
X
If you turn on the power after turning it off suddenly, the system may turn on and off
momentarily. This is one of the characteristics of the Intel PC main board, not a system error.
Shutting Down the System
Press the On/O button while using the system to initiate shutdown.
CAUTION:
X
When the system is not turned off, holding down the On/O button for five seconds or longer
forces the product to power off.
X
If the ultrasound system is unplugged while working or turned off by forcibly shutting down,
the files may get corrupted and it may result in system down or data loss.
X
To ensure that the product is safely cut off from electrical power, set the power switch at the rear
of the product to Off position after using the product.
h